You are here
> > Other
>> Pug Mills Various
PUGMILLS / DE-AIRING PUGMILLSAll G-Series Pugmills are constructed on the same principle, aluminium bodies which are detachable for easy cleaning, non-rusting individually adjustable blades are fitted as standard to the pug shaft which in turn runs in two taper roller bearings (on some models). These bearings which are protected from the clay by an oil seal and retaining plate which must make G-Series pugmills the best engineered on the market. Safety is another important feature of G-Series pugmills and it is our policy to provide maximum safety without compromising the performance of the machine.
All G-Series pugmills are fitted with thermal overload protected starters and safety limit switches which control the motor, when the loading hopper is raised or lowered making them very easy to use, some models are fitted with fixed finger guards in the hopper for protection . Key operated lockout switches can be supplied as an
Another important feature for convenience of the operator is that the handle assembly on the 50mm and 75mm outlet pugmills is in line with the pugmill body thereby avoiding the handle sticking out into the workshop gangway and also making it impossible to tilt the pugmill over when pressure is applied to the handle.
The vertical pugmill G53 has been developed from the G52 to enable it to operate in the vertical plane.